Carbon Fiber Felt As Thermal Insulation Graphite Felt Activated Carbon Fiber Felt
The carbon fiber felt in our company is dedicated to heat preservation, fire-resistant, etc. It has many advantages like high heat resistance, good heat insulation, easy to cut, cheap, etc. So far, it has been applied by lots of factories and won high praise from customers. The thickness of the hard felt are 20mm, 30mm, 40mm, 50mm, 60mm etc. Graphite film, graphite cloth, C/C, SIC can be covered by its surface.
Mainly applied to heat preservation and fire-resistant of high temperature furnace, like single crystal furnace, carbonization furnace, quartz furnace, vacuum furnace, induction furnace, high-frequency furnace and reactor heat balance, heat treatment furnace, sintering furnace, welding furnaces, pressure furnace etc.
Qualification | |
Volume Density (g/cm3) | 0.25-0.30 |
Tensile Strength (MPa) | 2.5 (Deformation 5%) |
Thermal Of Resistance (Ohm.cm) | 0.18-0.22 |
Carbon Content (%) | ≥99.4 |
Coefficient Of Resistance (Ohm.cm) | 0.18-0.22 |
Thermal Conductivity (W/m.k) | 0.15-0.25 (25℃); 0.40-0.45 (1400℃) |
Ash Content (%) | ≤0.5 |
Rate Of Gas Absorption (%) | ≤1.6 |
Purification Level | 99.3 |
Processing Temperature (℃) | 1450-2000 |
Specification | |
Plate (Max) | 1500*1800 |
Thickness (mm)-Plate | 20-200 |
Tube (Max) | 1500*2000 |
Thickness (mm)-Tube | 20-150 |
Squre Tube (Max) | 1500*1200*2000 |
Thickness (mm)-Square tube | 60-120 |
Application Temperature (℃) | 1250-2600 |
Question: Are you a factory?
[Amy reply:] Yes. We are direct factory who owns production lines and workers. Everything is flexible and there is no need to worry about extra charges by the middle man or trader.
Question: Do you have customization or OEM service?
[Amy reply:] Yes, we have. All products can be customized as per your requirements.
Question: Can I get free samples?
[Amy reply:] If the sample is available, yes, can be free. If unavailable, need to customize.